新聞中心
電腦模切打樣機的特點和常用刀座
2019-09-28 13:08:01
電腦模切打樣機功能特點|Functions and special feature
● 傳動系統全面采用進口直線導軌,速度快,精度高,聲音小,質量穩定。
● Imported straight-line guide rails are used for the transmission system at a quick speed, high accuracy, low noise and steady quality.
● 靜電板采用日本原裝進口件,其它零配件也大量采用了進口產品。
● Japanese originally imported pieces for static boards, and a great number of imported products are also used for other parts and components.
● 最快切割速度達1200mm/s。
● The quickest cutting speed is at 1200mm/s.
● 256M緩沖區,一次性完成快速傳輸。
● A buffer at 256M and completion of one-off quick transmission.
● 標準I/O接口,HP-GL格式。
● Standard I/O interface in HP-GL format.
● 可連接任意CAD軟件,廣泛應用于服裝、制鞋、箱包手袋、激光刀模繪圖、燈飾、廣告禮品、不干膠、彩盒包裝等行業之繪圖與切割。
電腦模切打樣機常用刀座:
模切電腦打樣機刀座
● 傳動系統全面采用進口直線導軌,速度快,精度高,聲音小,質量穩定。
● Imported straight-line guide rails are used for the transmission system at a quick speed, high accuracy, low noise and steady quality.
● 靜電板采用日本原裝進口件,其它零配件也大量采用了進口產品。
● Japanese originally imported pieces for static boards, and a great number of imported products are also used for other parts and components.
● 最快切割速度達1200mm/s。
● The quickest cutting speed is at 1200mm/s.
● 256M緩沖區,一次性完成快速傳輸。
● A buffer at 256M and completion of one-off quick transmission.
● 標準I/O接口,HP-GL格式。
● Standard I/O interface in HP-GL format.
● 可連接任意CAD軟件,廣泛應用于服裝、制鞋、箱包手袋、激光刀模繪圖、燈飾、廣告禮品、不干膠、彩盒包裝等行業之繪圖與切割。
電腦模切打樣機常用刀座:
模切電腦打樣機刀座